HPMC Construction Grade

Hydroxypropyl methyl cellulose (HPMC) is a natural polymer materials as raw materials,through a series of chemical processing and prepared non-ionic cellulose. It contains almost methyl cellulose(MC) of all the performance, your first choice for production of high quality building materials additives.To meet the needs of environmental protection, Our product with high water retention, dispersion, good fineness, good work ability, easy dissolution characteristics.It suitable for dry mortar building, both inside and outside wall putty powder milk (cream), adhesives, caulks, interface agents, coatings, self-leveling agent of new building materials. 
 
Appearance: White powder.
Particle size: 98.0%min through 100mesh.
Charring temperature: 280-300 Deg.C.
Bulk density: 0.25-0.70g/cm3(Usually around 0.5g/cm3)
Real specific gravity: 1.26-1.31
Browning temperature: 190-200 Deg.C.
Surface tension (2% water solution):42-56 dyn/cm.
 
Product properties
1.  Water Retention: The water retention will be enhanced, which is helpful with such problems as cement or gypsum construction material drying too fast and poor hardening or cracking due to insufficient hydration.
2. Operationality: It can enhance the plasticity of mortar and improve the coating efficiency in construction projects.
3. Adhesivity: It can make mortar attach to base material better since the plasticity of mortar is enhanced.
4. Slip Resistance: It can prevent slipping problem between mortar and the base material in construction project as a result of its thickening effect.
 
Product Parameters

Product name	Hydroxy propyl methyl cellulose (HPMC)
Content of methoxyl	24.0  –   30.0
Content of hydroxy propyl	9.0  –  12.0
Temperature of gelation	63℃   – 75 ℃
Moisture	≦5%
Ash	≦5%
PH value	7   –   8
Appearance	white powder
Fitness	80-100 mesh
Viscosity	4,000 to 200,000 it can be customized
HPMC increased with methoxy content reduce, the gel point water solubility and surface activity also declind, depends on customer’s situation.

Application:
– Tile Adhesive
– Gypsum based skim coat
– Paste water resistant putty
– Dry-mixed plastering mortar
– Masonry mortar
– Joint filler 

Packing and Storage
Standard Packing: In 25kg bags
Store it in a cool, dry place below 30degree and protected against humidity and pressing, since the goods is thermoplastic, storage time should not exceed six months.
Quantity/20GP:12Tons with pallets,14tons without pallets
Quantity/40GP:24Tons with pallets ,28tons without pallets

HPMC Construction Grade